Skip to content
ProteGo Hygiene

Protection that doesn't sleep.

Ordinary disinfectants stop working once they dry. ProteGo leaves a bonded antimicrobial layer that keeps working between cleans.

  • Up to 30 daysper application
  • Bonded layerstays on the surface
  • ATP verifiedbefore and after
White molecule models floating against a soft blue-grey background

The cleaning gap.

Traditional disinfectants wear off within hours. ProteGo stays active for up to 30 days.

Over 30 days, a surface cleaned daily with a traditional disinfectant is protected for only a few hours after each clean. A surface treated once with ProteGo is protected on all 30 days.

Traditional disinfectant, cleaned daily

A few hours after each clean

ProteGo, applied once

All 30 days

Protected Exposed to germsIllustration
Traditional disinfectants compared with ProteGo
Compared onTraditionalProteGo
Protection lifeMinutes to hoursUp to 30 days
LabourDailyMonthly
FormulaHarsh chemicals~98% water
ProofNoneATP report

Science that protects. Technology that lasts.

Si-QAC nanotechnology bonds to the surface, so protection stays put instead of drying away.

  1. 1Apply

    A fine ULV mist coats every high-touch surface.

  2. 2Bond

    It dries in about an hour into an invisible, bonded layer.

  3. 3Protect

    Charged tips disrupt microbes on contact, for up to 30 days.

  4. 4Verify

    ATP tested before and after, with a report.

Si-QAC nanotechnology

The science, simply.

A protectant that bonds, rather than a disinfectant that evaporates.

  • It bonds

    Si-QAC is a silane-bonded quaternary ammonium compound. Once applied, it forms an invisible layer that bonds to the surface instead of evaporating.

  • It stays active

    The layer carries positive charges that disrupt microbes on contact, touch after touch, between cleans.

  • It stays put

    It is non-leaching and non-flammable, so the layer stays on the surface where it was applied.

ATP verification

What gets measured gets trusted.

Clean can’t be seen, but it can be measured. We swab high-touch surfaces before and after every application and read them on site in Relative Light Units (RLU). Lower is cleaner.

  • 0–30 RLUExcellent
  • 31–100 RLUAcceptable
  • Above 100 RLUNeeds attention

ATP measures organic residue, a cleanliness indicator, not a count of microbes. Bands are ProteGo’s own guide.

ATP readingSample
356
18
BeforeAfter

RLU. Dashed line: 30 RLU, the “excellent” threshold.

FAQ

Does it replace cleaning?

No. Clean as usual. ProteGo complements routine cleaning by protecting surfaces in between.

Which surfaces can be treated?

Hard, non-food-contact, high-touch surfaces: door handles, lift buttons, handrails, desks, counters, switches and the like.

How has it been tested?

Its efficacy has been tested by an NABL-accredited laboratory.

See it on your own surfaces.

Book a free assessment and we'll take ATP readings on your high-touch surfaces, then suggest a plan.